2026 cost calculator

Driveway Replacement Cost

What replacing a driveway costs by material and area, with tear-out and grading extras. A typical job (600 sq ft concrete driveway) costs about $7,500 nationally.

Prices checked Oct 8, 20263 pricing sourcesBenchmark-tested

Estimate your driveway replacement cost

Your project
Extra work

Driveway replacement cost per square foot

Installed price per square foot, captured 2026-10-08
New driveway materialInstalled priceGood to know
Concrete$6–$18Sources disagree on the low end
Asphalt$7–$15Usually cheaper to lay, needs sealing
Gravel$3–$10Cheapest; only one guide prices it installed
Pavers (brick or stone)$10–$50The widest range, set by the stone or brick

These are installed prices per square foot, with the labor share adjusted for your state. A two-car driveway is roughly 600 square feet, which is the starting size in the calculator. Tear-out of the old surface is ticked by default because this is a replacement estimate; untick it if your quote already folds it into the per-foot price.

What changes the price

Material sets the base price, but the site decides how much extra work you need. A driveway that needs the old slab broken up and hauled away, ground that has to be regraded, or water that needs a drain adds cost on top. Stamped or colored finishes, thicker slabs and sloped lots also cost more, and none of the guides price them with one reliable figure, so ask for each as its own line.

Extra costs to expect

Common extras
ItemTypical costWhen it applies
Tear-out of the old driveway$1–$6 per sq ftIncluded for a replacement unless your quote bundles it
Grading and leveling$5–$10 per sq ftWhen the ground needs regrading
Drainage system$400–$2,400If water pools or runs toward the house
Permit$50–$200Some cities require one, especially when the driveway meets the street

Sealing is not priced here because the guides disagree on how to count it. Ask whether the quote includes sealing, expansion joints and a warranty.

Questions to ask before you hire

  • Does the price include tear-out and hauling away the old driveway?
  • How thick will the slab or asphalt be, and what is the base?
  • Is grading or drainage work included?
  • Who pulls the permit, and does the apron at the street need one?
  • How long before I can drive on it?

Methodology and sources

We price each material as an installed price per square foot, adjust the labor share for your state's construction wages, and price tear-out, grading, drainage and the permit separately. Read how we estimate costs.

What each source reports

Our estimate does not rely on any single page. This table lists each page we used and the figures it reports, so you can see where the ranges come from.

Source-by-source figures behind this calculator
SourceWhat it reports
HomeAdvisor
  • concrete $8 to $18 per sq ft installed (updated Jun 2026)
  • asphalt or blacktop $7 to $15 per sq ft installed (updated Jun 2026)
  • pavers including brick and stone $10 to $50 per sq ft installed (updated Jun 2026)
  • asphalt labor $5 to $7 per sq ft within $7 to $15 installed, and concrete labor $2 to $3 (updated Jun 2026)
  • removal of an old driveway $2 to $6 per sq ft (updated Jun 2026)
  • permits $50 to $200 (updated Jun 2026)
HomeGuide
  • plain gray concrete $6 to $15 per sq ft in the text, though its summary table shows $4 to $8 (written Dec 2025, no update date)
  • asphalt $5 to $12 per sq ft in the text, though its summary table shows $3 to $7 (written Dec 2025, no update date)
  • gravel $4 to $10 per sq ft in the text, and $1 to $3 in its summary table (written Dec 2025, no update date)
  • pavers $10 to $30 per sq ft, and high-end paving stones or brick $25 to $50 (written Dec 2025, no update date)
  • labor is about 50% of the total project cost (written Dec 2025, no update date)
  • old driveway removal $1 to $3 per sq ft (written Dec 2025, no update date)
  • grading and site prep $5 to $8 per sq ft (written Dec 2025, no update date)
  • a drainage system $400 to $2,400 (written Dec 2025, no update date)
  • permits about $50 to $200, and some cities waive the fee when a paved apron already connects to the street (written Dec 2025, no update date)
Angi
  • replacement asphalt $8 to $15 per sq ft, standard $7 to $13 (updated Apr 2026)
  • removal $1 to $2 per sq ft (updated Apr 2026)
  • grading and leveling $5 to $10 per sq ft (updated Apr 2026)

Common questions about driveway replacement costs

How much does driveway replacement cost?

A typical job (600 sq ft concrete driveway) comes to about $7,500 nationally, within a range of $4,200 to $14,400. Use the calculator above to adjust for your state, the options you choose and any extras.

How much does a concrete or asphalt driveway replacement cost?

Concrete runs about $6–$18 per square foot and asphalt about $7–$15. For a 600 sq ft driveway, that is about $4,200–$14,400 for concrete and $4,800–$12,600 for asphalt, including tear-out.

Where do these prices come from?

They come from 3 published cost pages from 3 publishers, last checked Oct 8, 2026. We report what those pages say and do not invent figures; the table above shows each source.

How does my state change the estimate?

The labor part of the price is scaled by the average wage for the relevant trade in your state, using Bureau of Labor Statistics data. Materials and equipment are not adjusted.

Why might a contractor's quote differ from this estimate?

A quote reflects your specific scope, access, local demand and what the contractor includes. Ask for line items rather than a single total so you can compare bids on the same basis.

All 3 sources behind these prices

Every figure in the calculator comes from one or more of these pages, with the number each one supports in the link text.

Next project

Price the rest of your home the same way.

Every calculator uses cited prices and your state’s labor data.

Browse all calculators