Door & Window Costs
Door and window prices depend on the product first and the installation second. Frame material, glass package, size and style set the price of the unit, then the installer adds labor that depends on whether the opening stays the same or needs to change. A like-for-like swap in an existing opening is the simplest job; a new or enlarged opening brings framing, trim and finishing work.
The calculators below cover windows, entry and patio doors, storm and interior doors, and garage doors. The table shows the starting point of each one, a typical national job, so you can compare projects before opening a calculator.
Windows
Replacing glass and frames, or improving what you already have.
| Project | Typical job | Typical price | Likely range |
|---|---|---|---|
| Window replacement cost | 10 vinyl insert windows | $6,290 | $4,000–$9,060 |
| Window tinting cost | 100 sq ft, solar film | $800 | $500–$1,400 |
Entry, patio and interior doors
Doors people walk through every day.
| Project | Typical job | Typical price | Likely range |
|---|---|---|---|
| Front door replacement cost | Fiberglass prehung door | $1,700 | $800–$2,800 |
| Patio door replacement cost | Vinyl sliding door | $2,150 | $1,100–$3,500 |
| Storm door installation cost | Mid-view or high-view door | $450 | $300–$780 |
| Interior door installation cost | Prehung door | $450 | $170–$1,000 |
Garage doors
Replacement doors and the most common repairs.
| Project | Typical job | Typical price | Likely range |
|---|---|---|---|
| Garage door replacement cost | Double, insulated steel | $1,760 | $1,120–$2,880 |
| Garage door repair cost | Door off its track | $200 | $100–$350 |
| Garage door spring replacement cost | Pair of torsion springs | $350 | $200–$500 |
What drives the price
- Frame and glass package
- Frame material and the glass package (layers, coatings, gas fill) account for most of the price difference between basic and high-performance windows and doors.
- Size and style
- Larger units, unusual shapes and special styles cost more to build and more to install.
- Insert or full replacement
- Fitting a new unit inside an existing frame is usually cheaper than removing the frame, and a full replacement is the right choice when the frame or surrounding wall is damaged.
- New or enlarged openings
- Cutting a new opening, or making one bigger, adds framing, headers, siding or drywall repair, and finishing.
- Count and access
- Ordering several units at once can lower the per-unit labor, while upper floors, difficult access and historic trim raise it.
Before you hire
- Compare quotes for the same brand line, glass package and frame material, not just the total.
- Ask whether trim, caulking, disposal of the old unit and interior or exterior finishing are included.
- Ask who measures, and what happens if the unit arrives the wrong size.
- Check the product warranty and the installer warranty separately, and ask what voids each.
- For garage doors, ask whether the quote covers the opener, springs, hardware and disposal.
These are planning estimates, not quotes. Your home, local codes and contractor will change the real price. See how we estimate and the disclaimer.
Common questions about doors & windows costs
Is it cheaper to replace one window or all of them?
The per-window price is usually similar, but a whole-house project can reduce the installer visit and setup cost per unit. Mismatched windows can also look uneven, so ask the installer to price both options.
Do new windows and doors pay for themselves in energy savings?
Often not on energy savings alone. Savings depend on what you replace, your climate and your utility prices. Treat comfort, noise, security and appearance as part of the value, and check current incentives with your utility or state before you buy.
What does the installer need to know to quote accurately?
Window and door sizes, how many, the frame material you want, the number of floors, and whether trim or siding will be disturbed. Photos of each opening help.
Planning guides
- Repair or Replace? How to Decide: Typical repair and replacement prices side by side, and the questions that settle it.
- DIY or Hire a Pro? A Practical Guide: Which jobs are reasonable to do yourself, and which are not worth the risk.
- How to Compare Contractor Quotes: Make quotes comparable, spot gaps, and keep a printable comparison sheet.
- Do You Need a Permit? Home Project Permits Explained: When a permit is needed, who pulls it, and the fee ranges our sources cite.
- Why Home Project Costs Differ by State: What moves prices between states, with real wage data for seven trades.